Sandia 60-1000 Force 14 Upright Vacuum – 14", 4000 RPM, HEPA, 12A

Sandia 60-1000 Force 14 Dual-Motor Upright Vacuum – 4000 RPM Brush, HEPA Option

The Force 14 runs separate motors for suction and brush — a 12-amp/1,000-watt main motor delivering 74.8 inches of vacuum lift, and a 1.3-amp secondary motor driving the brush roll at 4,000 RPM. The brush motor auto-disengages when the handle is upright or when using wand tools, protecting carpet fibers during above-floor work. A telescopic wand and stretch hose extend reach to 9 feet, and the 4.75-quart micro-filtration bag captures fine dust. HEPA filtration is available as an upgrade option on the standard micro-bag system.

Force 14 Dual-Motor Specs and Electronic Brush Monitoring

• Suction motor: 12 amps / 1,000 watts — 74.8 inches vacuum lift for deep carpet soil removal
• Brush motor: 1.3 amps, 4,000 RPM — dedicated brush power maintained independent of suction load
• Electronic brush sensor: monitors brush and belt condition, signals when service is needed
• Brush auto-disengage: stops when handle is upright or tools are in use — carpet protection
• Cleaning path: 14 inches wide with 4-position manual height adjustment
• Filtration: 4.75-quart micro-filtration bag; HEPA filtration available as upgrade
• Above-floor reach: 9 feet — telescopic wand and stretch hose
• Power cord: 50 ft safety cord
• Included tools: upholstery brush, dusting brush, crevice tool — on-board storage
• Stainless steel glide plate: smooth movement over carpet without snagging
• OSHA compliant, UL approved for commercial use
• Noise level: 78 dBA
• Weight: 19.8 lbs

Where the 4000 RPM Brush Motor Makes a Difference

Commercial carpet in high-traffic hotel corridors, office buildings, and casinos compacts over time as foot traffic pushes soil below the fiber surface. Brush agitation at 4,000 RPM loosens this embedded soil and brings it into the airstream before suction removes it. Single-motor uprights share power between suction and brush — at 4,000 RPM brush demand, suction often drops. The Force 14's separate 1.3-amp brush motor maintains full RPM regardless of what the suction motor is doing. The electronic brush/belt sensor adds another layer: operators are alerted to belt wear or brush obstruction before it affects cleaning performance, preventing missed soil rather than discovering it at the end of a shift.

Force 14 Filtration and OSHA Compliance

The Force 14 ships with a 4.75-quart micro-filtration bag. A HEPA filtration upgrade is available for facilities requiring HEPA-certified exhaust — healthcare environments under infection control protocols, OSHA 29 CFR 1910.134 applications, or buildings under EPA RRP lead dust removal protocols. The base unit is OSHA-compliant and UL-approved for commercial use. The modular design allows the HEPA option to be specified at purchase for facilities that know they need it, or sourced as an upgrade for facilities that add HEPA requirements after initial purchase. The 5-piece tool kit (upholstery brush, dusting brush, crevice tool plus telescopic wand components) handles complete floor-to-ceiling coverage.

Documents

Force 14 Info Sheet
Force 14 Operating Manual