The NaceCare CRL 2128/100T (part number K-916888-C2B) is a compact ride-on floor scrubber with a 28-inch cleaning path, two NX1K lithium phosphate batteries providing 4 hours of runtime, and rear-wheel drive capable of 11-degree ramp grades. At 65 dB(A), 70 lbs of pad pressure, 21-gallon solution and recovery tanks, and 43,300 square feet per hour of working capacity, this machine delivers ride-on productivity with a footprint compact enough to fit in standard janitor closets — without the walk-behind fatigue of an operator pushing a 28-inch deck machine.
CRL 2128/100T Ride-On Performance and NX1K Battery Specs
28" cleaning path / 43,300 sq ft/hr: ride-on configuration allows consistent operator pace without fatigue, enabling higher sustained coverage than walk-behind machines where operator speed varies.
2×NX1K lithium phosphate batteries, 4-hr runtime: 4 hours covers a full cleaning shift; NX1K cells support over 4,000 cycles, recharged to full in 5 hours with no memory effect.
Rear-wheel drive, 11-degree ramp capability: climbs loading dock ramps, entrance ramps, and multi-level building transitions that stop non-drive scrubbers from accessing all areas.
65 dB(A) noise level: one of the quietest ride-on scrubbers in this class; below the 70 dB threshold where OSHA recommends hearing protection, suitable for hospital, school, and occupied retail environments.
70 lb pad pressure across dual 14" brushes: appropriate for daily maintenance scrubbing; automatic pad loading system changes brushes without tools, reducing downtime between pad replacements.
21-gal solution / 21-gal recovery tanks: high-capacity matched tanks reduce the number of stops needed to refill or empty on large floor runs.
Where the CRL 2128/100T Fits Between Walk-Behind and Larger Ride-On Scrubbers
The CRL 2128/100T is designed for facilities that need ride-on productivity but cannot store, maneuver, or justify the cost of full-size ride-on machines. In hospitals, the 65 dB operation and compact footprint allow cleaning in patient corridors and pharmacy areas during occupied hours. In retail, the janitor-closet-compatible size means the machine can be staged close to the cleaning area rather than stored in a remote equipment room. Cleaning contractors running multiple sites benefit from a machine that fits in a standard cargo van alongside other equipment, unlike full-size ride-ons that require dedicated transport.
CRL 2128/100T Stainless Steel Construction and Optional Accessories
The stainless steel chassis resists corrosion from cleaning chemical exposure and wet floor environments — important for machines that run regular wet scrubbing shifts over years of use. An optional off-aisle kit extends cleaning reach to areas the ride-on deck cannot access directly. The Nu-Assist app provides training and diagnostic support from a smartphone without requiring a service technician on site.
The NaceCare CRL 2128/100T (part number K-916888-C2B) is a compact ride-on floor scrubber with a 28-inch cleaning path, two NX1K lithium phosphate batteries providing 4 hours of runtime, and rear-wheel drive capable of 11-degree ramp grades. At 65 dB(A), 70 lbs of pad pressure, 21-gallon solution and recovery tanks, and 43,300 square feet per hour of working capacity, this machine delivers ride-on productivity with a footprint compact enough to fit in standard janitor closets — without the walk-behind fatigue of an operator pushing a 28-inch deck machine.
CRL 2128/100T Ride-On Performance and NX1K Battery Specs
28" cleaning path / 43,300 sq ft/hr: ride-on configuration allows consistent operator pace without fatigue, enabling higher sustained coverage than walk-behind machines where operator speed varies.
2×NX1K lithium phosphate batteries, 4-hr runtime: 4 hours covers a full cleaning shift; NX1K cells support over 4,000 cycles, recharged to full in 5 hours with no memory effect.
Rear-wheel drive, 11-degree ramp capability: climbs loading dock ramps, entrance ramps, and multi-level building transitions that stop non-drive scrubbers from accessing all areas.
65 dB(A) noise level: one of the quietest ride-on scrubbers in this class; below the 70 dB threshold where OSHA recommends hearing protection, suitable for hospital, school, and occupied retail environments.
70 lb pad pressure across dual 14" brushes: appropriate for daily maintenance scrubbing; automatic pad loading system changes brushes without tools, reducing downtime between pad replacements.
21-gal solution / 21-gal recovery tanks: high-capacity matched tanks reduce the number of stops needed to refill or empty on large floor runs.
Where the CRL 2128/100T Fits Between Walk-Behind and Larger Ride-On Scrubbers
The CRL 2128/100T is designed for facilities that need ride-on productivity but cannot store, maneuver, or justify the cost of full-size ride-on machines. In hospitals, the 65 dB operation and compact footprint allow cleaning in patient corridors and pharmacy areas during occupied hours. In retail, the janitor-closet-compatible size means the machine can be staged close to the cleaning area rather than stored in a remote equipment room. Cleaning contractors running multiple sites benefit from a machine that fits in a standard cargo van alongside other equipment, unlike full-size ride-ons that require dedicated transport.
CRL 2128/100T Stainless Steel Construction and Optional Accessories
The stainless steel chassis resists corrosion from cleaning chemical exposure and wet floor environments — important for machines that run regular wet scrubbing shifts over years of use. An optional off-aisle kit extends cleaning reach to areas the ride-on deck cannot access directly. The Nu-Assist app provides training and diagnostic support from a smartphone without requiring a service technician on site.
This item is fulfilled by the US Cleaning Tools company from their warehousing. For further shipping information please contact our customer service team at specialtyfoodsource@jnkidds.com. Items ordered from this seller will ship separately from orders from our specialtyfoodsource.com warehouse or other shippers.
