NaceCare WVD 1802DH Dual-Motor Wet Vacuum – 1600W, 180 CFM, 20-Gal

NaceCare WVD 1802DH: Dual-Motor 20-Gallon Wet Vacuum for Maximum Liquid Recovery

The WVD 1802DH combines the dual-motor 180 CFM airflow of the WVD 902 with the 20-gallon structural foam capacity of the WV 1800DH series — the highest-output non-pumper wet vacuum in the NaceCare commercial range. Two 800W bypass motors produce 90" of water lift, the dump tube allows direct floor-drain emptying, and an optional 29" front squeegee adds wide-path floor coverage. The 10-year structural foam warranty and 1,100-hour motor life reflect the machine's design for continuous commercial and industrial service.

180 CFM at 20-Gallon Capacity

• Dual 800W motors (1600W total) — produce 180 CFM and 90" water lift for rapid liquid recovery from large floor areas
• 20-gallon structural foam tank — rustproof, impact-resistant body with 10-year tank and head warranty
• Ball-float wet shut-off — blocks motor inlet when tank reaches capacity, preventing liquid from reaching the motors
• Dump tube for floor-drain emptying — routes recovery water directly to drain without lifting the 86 lb unit
• Optional P-model continuous pump upgrade — available variant adds 60 GPM sump pump for uninterrupted large-volume recovery

Flood Remediation and Industrial Water Recovery

The WVD 1802DH is the non-pumper option for operations that need maximum wet vacuum performance without a continuous discharge setup — a commercial kitchen flood where the water source has been cut, an industrial spill where the liquid is contained to a defined area, or a basement water intrusion that requires thorough pickup before dehumidifiers are staged. At 180 CFM and 20 gallons per cycle, it moves more water per unit time than any other standard wet vacuum in the NaceCare lineup. Facilities that later decide continuous discharge is needed can upgrade to the WVD 1802P variant, which adds the 60 GPM sump pump in the same structural foam housing.

Specifications

Documents

Spec Sheet · Owner Manual