Powr-Flite Gulper II Flood Extractor – PF85DX, 92 CFM, 135" Lift, 10 GPM Pump

Gulper II Flood Extractor — 92 CFM, 135" Water Lift, 10 GPM Discharge Pump

The Powr-Flite Gulper II (model PF85DX) combines 92 CFM airflow with 135 inches of water lift and a 10 GPM self-priming impeller discharge pump. Solution and recovery tanks each hold 15 gallons. Electronic float with auto ON/OFF prevents overflow. 25-foot cord with 12-gauge, 3-wire construction. 500–1200 PSI pressure range.

Gulper II Extraction and Discharge Specs

• Airflow: 92 CFM
• Water lift: 135 inches
• Discharge pump: self-priming impeller, 5/10 GPM
• Solution pressure: 500–1200 PSI
• Solution tank: 15 gallons
• Recovery tank: 15 gallons
• Overflow protection: electronic float, auto ON/OFF
• Cord: 25 ft, 12-gauge 3-wire
• Wheels: 4-inch front wheels
• Hose: 25 ft of 2-inch vacuum hose
• Warranty: 2-year parts and labor

Where the 10 GPM Discharge Pump Matters

Flood restoration contractors deploy the Gulper II when the extraction volume exceeds what standard extraction equipment can handle before the recovery tank fills — the 10 GPM self-priming pump continuously transfers recovered water to a drain without the operator emptying the tank by hand. The 135-inch water lift handles water from subfloor cavities and saturated carpet pads that lower-lift extractors cannot reach. The electronic float auto-shutoff prevents pump damage if the discharge line becomes restricted. Single-cord operation simplifies power management in post-flood environments where outlets are limited.

Gulper II PF85DX Specifications

Documents

Spec Sheet · Manual

Video