Message Us
MON-FRI 8AM-4PM EST
Message Us
MON-FRI 8AM-4PM EST
The Sandia Sniper 80-3500 combines 500 PSI injection pressure with dual 3-stage vacuum motors that produce 205" of water lift. The dual 3-stage motors pull more moisture per pass than 2-stage configurations, while the 500 PSI pump drives solution deeper into dense carpet and grout than 100 PSI or 200 PSI extractors. Two 25-ft cords distribute the combined motor load across two circuits, allowing both motors to draw full amperage simultaneously.
The 80-3500 is positioned for professional carpet cleaning crews who need maximum extraction performance from a portable unit without a truck mount. The 500 PSI and 205" water lift combination addresses both the injection side (getting solution deep into fiber) and the extraction side (pulling moisture and suspended soil out quickly). Hotels, convention centers, and commercial office buildings with dense carpet specification benefit most from this configuration. Operators who also need heated extraction should step to the 80-3500-H, which adds a 2000W in-line heater to this same motor and pump configuration. The dual-cord requirement is standard for commercial buildings with accessible circuits on each floor.
Ships with 500 PSI pump, dual 3-stage Ametek motors (205" water lift), 12-gallon tanks, and two 25-ft cords. No heater. Optional: 25-ft crush-resistant hoses, stainless steel wand with dual spray jets, 4" stainless steel upholstery tool.
| Pump | 500 PSI adjustable |
|---|---|
| Vacuum Motors | Dual 3-Stage Ametek, 205" water lift |
| Solution Tank | 12 gallons |
| Recovery Tank | 12 gallons |
| Power Cords | Two — 25 ft, 12/3 gauge each |
| Heat | No |
| Weight | 131 lbs |
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}