Sandia Indy 80-4000-H Automotive Extractor – 100 PSI, 1200W Heat, 200°F
Sandia Indy 80-4000-H 12-Gallon Automotive Carpet Extractor with In-Line Heat
The Indy 80-4000-H runs a single 3-stage 1,258-watt motor delivering 99 CFM and 117 inches of water lift alongside a 100 PSI pump and 1,200-watt in-line heater that brings solution to 200°F. The single-cord operation and waist-high recessed controls make it practical at auto detailing bays with limited outlet access. The 12-gallon solution and recovery tanks handle extended detailing runs, and the unit ships with 25-foot hoses and a 4-inch stainless steel upholstery tool for immediate deployment on vehicle seats, floor mats, and trunk liners.
Indy 80-4000-H Specs and Single-Cord Design
- Vacuum motor: single 3-stage, 1,258 watts — 99 CFM airflow, 117 inches water lift
- Pump pressure: 100 PSI — consistent solution delivery through standard cleaning tools
- In-line heater: 1,200 watts — solution reaches 200°F for enhanced stain breakdown
- Solution tank: 12 gallons — extended detailing runs without refilling
- Recovery tank: 12 gallons — matched capacity for balanced operation
- Included: 25-foot vacuum and solution hoses, 4-inch stainless steel upholstery detailing tool
- Power: single 25-ft, 16/3-gauge safety cord — single-outlet operation
- Controls: waist-high recessed — ergonomic operation, protected during transport
- Wheels: 10-inch non-skid, non-marking — stair climbing and smooth transit
- Dimensions: 27"L × 20"W × 38"H
- Weight: 110 lbs
- Warranty: Lifetime (body), 2 years (motor and pump), 1 year (electrical), 90 days (tools/accessories)
Single-Cord Operation in Auto Detailing Environments
Auto detailing bays typically have one or two outlets per bay — not the multi-outlet access that carpet cleaning vans and restoration job sites have. The Indy 80-4000-H combines the motor and heater into a single 25-foot cord configuration designed for single-outlet operation. The 1,200-watt heater and 1,258-watt motor draw enough combined amperage to require dedicated 20-amp circuit access; the waist-high controls and single cord make setup at an individual bay outlet straightforward. For carpet cleaning operations that also need single-cord portable extractors for sites with limited outlets, the Indy 80-4000-H covers both application types.
Automotive Extractor Included Kit and Coverage
The Indy 80-4000-H ships with 25-foot vacuum and solution hoses and a 4-inch stainless steel upholstery detailing tool — purpose-sized for vehicle seat seams, console crevices, and door panels. The 100 PSI pump provides adequate solution pressure for standard automotive upholstery without over-saturating seat foam. At 200°F solution temperature, set pet stains, food spills, and ground-in soils in carpet and upholstery break down in fewer passes than cold-water extraction. The 12-gallon solution and recovery tanks support extended detailing sessions on multiple vehicles before draining and refilling.
| Model | 80-4000-H |
| Motor | Single 3-stage, 1,258 watts |
| Airflow | 99 CFM |
| Water lift | 117 inches |
| Pump pressure | 100 PSI |
| In-line heater | 1,200 watts / 200°F |
| Solution tank | 12 gallons |
| Recovery tank | 12 gallons |
| Power cord | 1 × 25 ft, 16/3-gauge |
| Weight | 110 lbs |
| Dimensions | 27"L × 20"W × 38"H |