Original price
$1,799.00
-
Original price
$1,799.00
Original price
$1,799.00
$1,799.00
-
$1,799.00
Current price
$1,799.00
| /
Availability:
In stock
EMPTY DOM REMOVE PROTECTOR
EMPTY DOM REMOVE PROTECTOR
EMPTY DOM REMOVE PROTECTOR
...
......
...
MR-1000 Forza Steam Cleaner — Chemical-Free Sanitizing at 75 PSI for Commercial Facilities
The Vapamore MR-1000 Forza is a continuous-steam commercial cleaning system built around a stainless steel boiler and a 1,900-watt external heater that together deliver up to 75 PSI of steam pressure at a nozzle tip temperature of 284°F — above the thermal threshold for pathogen elimination on most contact surfaces. Unlike compact countertop steam units with fixed tanks, the Forza carries over 3 gallons of combined water capacity across its 8L reservoir and 4L boiler, extending runtime between refills during heavy daily use. The removable U-shaped handle and onboard accessory storage basket make it practical to move between zones in food service kitchens, hotel laundry rooms, and healthcare facilities.
MR-1000 Forza Steam Output, Boiler Design, and Accessories
The Forza's CEME-brand internal components and powder-coated steel construction are the hardware details that separate it from consumer-grade machines with plastic boiler assemblies. The 50-piece accessory kit covers floor-to-upholstery cleaning without add-on purchases.
75 PSI peak at the nozzle (5 bar) — penetrates grout lines, equipment seams, and floor drain channels that surface-level detergents cannot reach
284°F tip temperature — meets the thermal sanitization threshold for food contact surfaces and allergen reduction on fabrics without chemical residue
Continuous steam flow — no pause-to-pressurize cycles; one operator can work uninterrupted through a full kitchen or vehicle detail session
8L reservoir + 4L boiler (3+ gallon combined) — reduces refill frequency compared to single-tank units with 1–2 gallon capacities
9-minute heat-up from cold — short enough to fit into pre-shift prep routines without delaying operations
25 ft power cord, 8 ft hose, 12 ft total reach — covers a standard commercial kitchen station or hotel bathroom without repositioning the unit
MR-1000 Forza Applications and Environments
Restaurants and commercial kitchens use the Forza to clean hood vents, fryer baskets, tile grout, and stainless prep surfaces where chemical residue is a compliance concern. Auto detailing shops rely on it for interior fabric sanitization, leather conditioning, and engine bay cleaning where water volume from pressure washers causes damage. Pest control operators and bed bug remediation contractors use the bed bug and fabric tool attachment as a heat treatment complement. Healthcare facilities, senior living communities, and allergy clinics use it on mattresses, upholstered seating, and HVAC vents where 284°F dry steam reduces allergens without chemical exposure. The 45 lb unit rolls on wheels and fits through standard doorways.
MR-1000 Forza Steam Temperature, PSI, and Dry-Steam Output
The Forza produces continuous dry steam from a 160°C (320°F) boiler, delivering 284°F at the nozzle tip — above the 212°F minimum for thermal sanitization. The continuous-fill design means no downtime between refills: water can be added to the 8L reservoir while the boiler maintains pressure. Steam flow rate is rated at 40 gal/min. No NSF or chemical certifications are required for steam-only sanitization in food service or healthcare environments when steam is used as the sole cleaning agent.
What's in the Box with the MR-1000 Forza
The Forza arrives as a complete 50-piece system. The machine, the steam gun, both floor heads and the full detail brush set are all in the carton, so nothing else has to be bought before the first job.
MR-1000 Forza machine — front and rear wheels, upright U-shaped handle, front carry handle and cord hooks, with the screws and tools needed to fit them
Steam gun and hose, 8 ft — trigger lock included for continuous steam
2 extension tubes — lock onto the steam gun for floors and overhead reach
Accessory tool adapter — required to mount the round detail brushes, jet nozzles and scrapers
Large elbow adapter — required to mount the floor heads and the triangle corner brush
2 floor heads — one with bristles, one for smooth surfaces
Triangle corner brush, smooth surface squeegee, detail jet tool and bed bug / fabric tool
24 round detail brushes — nylon grout, medium nylon, large nylon, small brass, large brass and large stainless steel, four of each
2 jet nozzles and 2 detail scrapers
4 microfiber floor pads and 4 cotton covers
Fill funnel
Accessory storage bag and removable parts storage basket — the basket lifts off the handle so tools can be carried separately from the machine
Any MR-1000 accessory shown elsewhere on this page is a spare or an upgrade rather than a missing piece. The one addition worth making at the time of purchase is the 12 ft extended steam gun and hose, which replaces the standard 8 ft hose when the machine has to stay parked further from the work.
MR-1000 Forza Steam Cleaner — Chemical-Free Sanitizing at 75 PSI for Commercial Facilities
The Vapamore MR-1000 Forza is a continuous-steam commercial cleaning system built around a stainless steel boiler and a 1,900-watt external heater that together deliver up to 75 PSI of steam pressure at a nozzle tip temperature of 284°F — above the thermal threshold for pathogen elimination on most contact surfaces. Unlike compact countertop steam units with fixed tanks, the Forza carries over 3 gallons of combined water capacity across its 8L reservoir and 4L boiler, extending runtime between refills during heavy daily use. The removable U-shaped handle and onboard accessory storage basket make it practical to move between zones in food service kitchens, hotel laundry rooms, and healthcare facilities.
MR-1000 Forza Steam Output, Boiler Design, and Accessories
The Forza's CEME-brand internal components and powder-coated steel construction are the hardware details that separate it from consumer-grade machines with plastic boiler assemblies. The 50-piece accessory kit covers floor-to-upholstery cleaning without add-on purchases.
75 PSI peak at the nozzle (5 bar) — penetrates grout lines, equipment seams, and floor drain channels that surface-level detergents cannot reach
284°F tip temperature — meets the thermal sanitization threshold for food contact surfaces and allergen reduction on fabrics without chemical residue
Continuous steam flow — no pause-to-pressurize cycles; one operator can work uninterrupted through a full kitchen or vehicle detail session
8L reservoir + 4L boiler (3+ gallon combined) — reduces refill frequency compared to single-tank units with 1–2 gallon capacities
9-minute heat-up from cold — short enough to fit into pre-shift prep routines without delaying operations
25 ft power cord, 8 ft hose, 12 ft total reach — covers a standard commercial kitchen station or hotel bathroom without repositioning the unit
MR-1000 Forza Applications and Environments
Restaurants and commercial kitchens use the Forza to clean hood vents, fryer baskets, tile grout, and stainless prep surfaces where chemical residue is a compliance concern. Auto detailing shops rely on it for interior fabric sanitization, leather conditioning, and engine bay cleaning where water volume from pressure washers causes damage. Pest control operators and bed bug remediation contractors use the bed bug and fabric tool attachment as a heat treatment complement. Healthcare facilities, senior living communities, and allergy clinics use it on mattresses, upholstered seating, and HVAC vents where 284°F dry steam reduces allergens without chemical exposure. The 45 lb unit rolls on wheels and fits through standard doorways.
MR-1000 Forza Steam Temperature, PSI, and Dry-Steam Output
The Forza produces continuous dry steam from a 160°C (320°F) boiler, delivering 284°F at the nozzle tip — above the 212°F minimum for thermal sanitization. The continuous-fill design means no downtime between refills: water can be added to the 8L reservoir while the boiler maintains pressure. Steam flow rate is rated at 40 gal/min. No NSF or chemical certifications are required for steam-only sanitization in food service or healthcare environments when steam is used as the sole cleaning agent.
What's in the Box with the MR-1000 Forza
The Forza arrives as a complete 50-piece system. The machine, the steam gun, both floor heads and the full detail brush set are all in the carton, so nothing else has to be bought before the first job.
MR-1000 Forza machine — front and rear wheels, upright U-shaped handle, front carry handle and cord hooks, with the screws and tools needed to fit them
Steam gun and hose, 8 ft — trigger lock included for continuous steam
2 extension tubes — lock onto the steam gun for floors and overhead reach
Accessory tool adapter — required to mount the round detail brushes, jet nozzles and scrapers
Large elbow adapter — required to mount the floor heads and the triangle corner brush
2 floor heads — one with bristles, one for smooth surfaces
Triangle corner brush, smooth surface squeegee, detail jet tool and bed bug / fabric tool
24 round detail brushes — nylon grout, medium nylon, large nylon, small brass, large brass and large stainless steel, four of each
2 jet nozzles and 2 detail scrapers
4 microfiber floor pads and 4 cotton covers
Fill funnel
Accessory storage bag and removable parts storage basket — the basket lifts off the handle so tools can be carried separately from the machine
Any MR-1000 accessory shown elsewhere on this page is a spare or an upgrade rather than a missing piece. The one addition worth making at the time of purchase is the 12 ft extended steam gun and hose, which replaces the standard 8 ft hose when the machine has to stay parked further from the work.
This item is fulfilled by the US Cleaning Tools company from their warehousing. For further shipping information please contact our customer service team at specialtyfoodsource@jnkidds.com. Items ordered from this seller will ship separately from orders from our specialtyfoodsource.com warehouse or other shippers.
